How to install LED high bay light
1. In the place where the
LED high bay light needs to be installed, pre-fix the hook. It should be noted that the hook should be used together with the lifting ring, and the bearing capacity should be more than 30Kg when installing the hook.
2. Snap the lifting ring on the LED high bay light into the set hook, and hoist the lamp through the lifting ring.
3. Connect the power cord drawn from the site to the power cord of the luminaire, connect it according to the wiring principle of the luminaire, and do waterproof and insulation treatment.
4. After turning on the power, observe whether the LED high bay light can work normally. After confirming that the light is on, the installation is complete.
0
English
.png?imageView2/2/w/346/format/jp2/q/70 "1000W HPS Ceramic Metal Halide Grow Light(HID)")
