Installation of LED floodlights
Materials needed: LED guardrail light clip, transformer with waterproof function, sub-controller, the steps are as follows:
1. Install guardrails, punch holes on the wall, and the spacing is generally within 3 cm according to actual requirements;
2. Do a good job of anti-static measures, such as grounding the workbench, workers wearing corresponding electrostatic clothing, and anti-static measures, because the quality of LED floodlights of different grades is different, and the anti-static ability is different;
3. Pay attention to the tightness of the installation, the tightness is not good, and the diameter affects the service life of the LED floodlight;
4. The
LED floodlight wiring should preferably not exceed 25 cm, and the transformer with high power can be lengthened accordingly, otherwise the brightness will be affected.
0
English
